Suitable for 11 kHz to 1 MHz
500 Vrms, One minute insulation (high voltage) winding to winding
Different turn ratios provide options.
The value of the terminating resistor is based on a 1-volt output, with 7 amperes flowing through the primary side. The variable terminal resistance increases or decreases the output voltage/ampere according to the following formula: RT (ohms)=Vout × Nsec/Iin.
Meets environmental requirements.
Operating Temperature: -40℃~+125℃
Suitable for switch mode power supplies, feedback controllers, overload sensing, load reduction/shutdown detection, etc
Part number 料号 | Turn ratio 匝比 Pri:sec | inductance 最小电感量 Min (µH) | DCR 直流电阻 Sec(Ω) | Voltage-time product 电压时间积 V.μS | Primary Rated Current 初级额定电流 A max | Frequency range 频率 KHz | Length mm | Width mm | Height mm |
CT050-020 | 1:20 | 81 | 0.0006 | 10.0 | 20 | 46 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-030 | 1:30 | 180 | 0.0006 | 15.0 | 20 | 31 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-040 | 1:40 | 320 | 0.0006 | 20.0 | 20 | 23 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-050 | 1:50 | 500 | 0.0006 | 25.0 | 20 | 19 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-060 | 1:60 | 730 | 0.0006 | 30.0 | 20 | 15 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-070 | 1:70 | 980 | 0.0006 | 35.0 | 20 | 13 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-100 | 1:100 | 2000 | 0.0006 | 50.0 | 20 | 9 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-125 | 1:125 | 3000 | 0.0006 | 62.5 | 20 | 7 – >1000 | 4.8 | 4.5 | 3.5 |
CT050-200 | 1:200 | 8000 | 0.0006 | 100.0 | 20 | 4 – >1000 | 4.8 | 4.5 | 3.5 |
Standard products in stock: | ![]() | ||||||||
结构尺寸/Dimensions |
![]() |