Core material: Iron powder
Molded coupled inductor
Low fluctuation of inductance with temperature variation
Two coupled inductors with the same winding can provide more variants through parallel and series connections
Operating Temperature: -40℃~+125℃
Reading
High power switching regulator
1: 1 flyback converter
Buck, Boost, Sepic, and Cuk converters
Switching regulator with a second non regulated output voltage
Battery charging balancer
Part number 料号 | Inductance 电感量 μH | DCR 直流电阻 mΩ | SRF 自谐频率 MHz | Isat 直流饱和电流 A | Irms 温升电流 A | Rated Voltage 额定电压（V） | K 耦合系数 | Length mm | Width mm | Height mm |
| MSD1008-103ML | 10 | 31 | 11 | 10.6 | 4.8 | 75 | ＞0.95 | 10.8±0.35 | 10.0±0.3 | 8（Max） |
| MSD1008-153ML | 15 | 39 | 8 | 9.1 | 4.6 | 75 | ＞0.95 | 10.8±0.35 | 10.0±0.3 | 8（Max） |
| MSD1008-223ML | 22 | 83 | 7 | 7.1 | 3.1 | 75 | ＞0.95 | 10.8±0.35 | 10.0±0.3 | 8（Max） |
| MSD1008-333ML | 33 | 99.5 | 6 | 6.5 | 2.9 | 55 | ＞0.95 | 10.8±0.35 | 10.0±0.3 | 8（Max） |
| MSD1008-473ML | 47 | 108 | 5 | 5.2 | 2.6 | 55 | ＞0.95 | 10.8±0.35 | 10.0±0.3 | 8（Max） |
| Standard products in stock： |  Small batch spot purchase | |||||||||
Remarks： ①The inductance test adopts Agilent 4284A digital bridge or equivalent instrument; Test frequency 100KHz ②The direct current resistance test uses a Keithley 580 milliohmmeter or equivalent instrument; Environmental temperature 25 ° C ③SRF was measured using Agilent 4395A network analyzer and Agilent 16193A test fixture. ④The direct current is at 25 ° C, and loading causes the specified inductance to decrease by 30% from the value without current. ⑤The current that causes the specified temperature to rise by 40 ℃ from the ambient temperature of 25 ° C. This information is for reference only and does not represent the absolute maximum rated value. ⑥Electrical specifications at 25 ° C | ||||||||||
结构尺寸/Dimensions | |
 | |
电气特性曲线/Electrical Characteristic Curve | |
 |
13823510378
13823685284
CN
CN