PR2013-472KL_SMD High Current Power Inductor_Products_ShenZhen Powerhen Electronic Co.,Ltd

Susing flat wire, and SMD type.

Low radiation noise by magnetically shielded construction

High current, Low resistance.

Operating temperature : -40℃~+125℃.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number 料号	Inductance 电感量 μH	DCR 最大直流电阻 mΩ	Isat 直流饱和电流 A	Irms 温升电流 A	SRF 自谐频率 MHz	Length mm	Width mm	Height mm
PR2013-681ML	0.68	1.82	98	30	104	19.18±0.51	18.70±0.86	12.95
PR2013-801ML	0.8	1.82	85	30	93	19.18±0.51	18.70±0.86	12.95
PR2013-901ML	0.9	1.82	73	30	98	19.18±0.51	18.70±0.86	12.95
PR2013-102ML	1	1.82	68	30	98	19.18±0.51	18.70±0.86	12.95
PR2013-122ML	1.2	1.82	58	30	82	19.18±0.51	18.70±0.86	12.95
PR2013-202KL	2	1.82	40	30	61	19.18±0.51	18.70±0.86	12.95
PR2013-362KL	3.6	1.7	25	30	38	19.18±0.51	18.70±0.86	12.95
PR2013-402KL	4	1.82	20	30	35	19.18±0.51	18.70±0.86	12.95
PR2013-472KL	4.7	1.82	18	30	30	19.18±0.51	18.70±0.86	12.95
Standard products are stocked：		Buy in stock in small quantities
Remark： ① Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 100kHz ② DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C ③ SRF measured using an Agilent 4395A network analyzer and an Agilent 16193A test fixture. ④ DC current at 25°C that causes the specified inductance drop from its value without current. ⑤ Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. ⑥ Electrical specifications at 25°C

Dimensions

Electrical Characteristic Curve