PR2011-501ML_SMD High Current Power Inductor_Products_ShenZhen Powerhen Electronic Co.,Ltd

Susing flat wire, and SMD type.

Low radiation noise by magnetically shielded construction

High current, Low resistance.

Operating temperature : -40℃~+125℃.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number 料号	Inductance 电感量 μH	DCR 最大直流电阻 mΩ	Isat 直流饱和电流 A	Irms 温升电流 A	SRF 自谐频率 MHz	Length mm	Width mm	Height mm
PR2011-501ML	0.5	1.34	>100	40	161	19.18±0.51	18.70±0.86	10.67
PR2011-601ML	0.6	1.34	90	40	124	19.18±0.51	18.70±0.86	10.67
PR2011-681ML	0.68	1.34	78	40	135	19.18±0.51	18.70±0.86	10.67
PR2011-801ML	0.8	1.34	70	40	113	19.18±0.51	18.70±0.86	10.67
PR2011-901ML	0.9	1.34	62	40	104	19.18±0.51	18.70±0.86	10.67
PR2011-102ML	1.0	1.34	56	40	97	19.18±0.51	18.70±0.86	10.67
PR2011-122ML	1.2	1.34	49	40	81	19.18±0.51	18.70±0.86	10.67
PR2011-202KL	2.0	1.34	32	40	56	19.18±0.51	18.70±0.86	10.67
Standard products are stocked：		Buy in stock in small quantities
Remark ① Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 100kHz ② DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25℃ ③ SRF measured using an Agilent 4395A network analyzer and an Agilent 16093A test fixture. ④ DC current at 25℃ that causes the specified inductance drop from its value without current. ⑤ Current that causes the specified temperature rise from 25℃ ambient. This information is for reference only and does not represent absolute maximum ratings. ⑥ Electrical specifications at 25℃

Dimensions

Electrical Characteristic Curve