PH26C-333KL_SMD High Current Power Inductor_Products_ShenZhen Powerhen Electronic Co.,Ltd

Susing flat wire, and SMD type.

Low radiation noise by magnetically shielded construction

High current, Low resistance.

Operating temperature : -40℃~+125℃.

Tray packaging: –40℃ to +80℃

Resistance to soldering heat Max three 40 second reflows at +260℃, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30℃ / 85% relative humidity)

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number 料号	Inductance 电感量 μH±10%	DCR 最大直流电阻 mΩ	Isat 直流饱和电流 A	Irms 温升电流 A	SRF 自谐频率 MHz	Length mm	Width mm	Height mm
PH26C-152KL	1.5	1.65	100	32	60	27.9	27.9	15.8
PH26C-222KL	2.2	1.65	82	32	50	27.9	27.9	15.8
PH26C-332KL	3.3	1.65	48	32	40	27.9	27.9	15.8
PH26C-472KL	4.7	1.65	33	32	30	27.9	27.9	15.8
PH26C-682KL	6.8	1.65	22	32	25	27.9	27.9	15.8
PH26C-103KL	10	1.65	13	32	20	27.9	27.9	15.8
PH26C-153KL	15	1.65	7.5	32	15	27.9	27.9	15.8
PH26C-223KL	22	1.65	4.5	32	10	27.9	27.9	15.8
PH26C-333KL	33	1.65	2	32	7	27.9	27.9	15.8
Standard products are stocked：		Buy in stock in small quantities
Remark ① Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 500kHz ② DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C ③ SRF measured using an Agilent 4395A network analyzer and an Agilent 16193A test fixture. ④ DC current at 25°C that causes the specified Inductance drop from its value without current. ⑤ Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. ⑥ Electrical specifications at 25°C

Dimensions	Electrical Characteristic Curv