Susing flat wire, and SMD type.
Low radiation noise by magnetically shielded construction
High current, Low resistance.
Operating temperature : -40℃~+125℃.
Tray packaging: –40℃ to +80℃
Resistance to soldering heat Max three 40 second reflows at +260℃, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30℃ / 85% relative humidity)
High efficiency DC/DC converters.
Single and polyphase buck converters.
Filter for audio applications.
Optimized for high current boost applications.
Part number 料号 | Inductance 电感量 μH±10% | DCR 最大直流电阻 mΩ | Isat 直流饱和电流 A | Irms 温升电流 A | SRF 自谐频率 MHz | Length mm | Width mm | Height mm |
PH26A-332KL | 3.3 | 2.5 | 91 | 30 | 40 | 27.9 | 27.9 | 18 |
PH26A-472KL | 4.7 | 2.5 | 59 | 30 | 30 | 27.9 | 27.9 | 18 |
PH26A-682KL | 6.8 | 2.5 | 42 | 30 | 25 | 27.9 | 27.9 | 18 |
PH26A-103KL | 10 | 2.5 | 28 | 30 | 20 | 27.9 | 27.9 | 18 |
PH26A-153KL | 15 | 2.5 | 18 | 30 | 16 | 27.9 | 27.9 | 18 |
PH26A-223KL | 22 | 2.5 | 12 | 30 | 15 | 27.9 | 27.9 | 18 |
PH26A-333KL | 33 | 2.5 | 7 | 30 | 10 | 27.9 | 27.9 | 18 |
Standard products are stocked: | Buy in stock in small quantities | |||||||
Remark ①Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 500kHz ②DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C ③SRF measured using an Agilent 4395A network analyzer and an Agilent 16193A test fixture. ④DC current at 25°C that causes the specified Inductance drop from its value without current. ⑤Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. ⑥Electrical specifications at 25°C |
Dimensions | Electrical Characteristic Curve |