CN

SMD HIGH CURRENT POWER INDUCTOR

PG135

Susing flat wire, and SMD type.

Low radiation noise by magnetically shielded construction

High current, Low resistance.

Operating temperature : -40℃~+125℃.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Contact Us

Specification

Reading

Application

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number

料号

Inductance

电感量

μH

DCR

直流电阻

Isat

直流饱和电流

A

Irms

温升电流

A

SRF

自谐频率

MHz

Length

mm

Width

mm

Height

mm

PG135-191ML0.190.52826.222512.8±0.513.0±1.04.7±0.3
PG135-471ML0.470.924239512.8±0.513.0±1.04.7±0.3
PG135-901ML0.91.61120.67212.8±0.513.0±1.04.7±0.3
PG135-142ML1.42.41018.66012.8±0.513.0±1.04.7±0.3
PG135-232ML2.33.7715.64012.8±0.513.0±1.04.7±0.3
PG135-322ML3.25.3614.13412.8±0.513.0±1.04.7±0.3
PG135-482ML4.810.55.59.52812.8±0.513.0±1.04.7±0.3
PG135-602ML611.65.09.12212.8±0.513.0±1.04.7±0.3
PG135-822ML8.213.55.0
8.22012.8±0.513.0±1.04.7±0.3
PG135-103ML1014.15.081812.8±0.513.0±1.04.7±0.3
Standard products are stocked手指斜点.pngBuy in stock in small quantities

Remark:

① Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 100kHz

② DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C

③ SRF measured using an Agilent 4395Anetwork analyzer and an Agilent 16193A test fixture.

④ DC current at 25°C that causes the specified Inductance drop from its value without current.

⑤ Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and 

does not represent absolute maximum ratings.

⑥ Electrical specifications at 25°C


remark

Dimension

规格尺寸-PG135
Electrical Characteristic Curve
曲线图-PG135


For reference only and does not represent the absolute maximum rating.