CN

SMD HIGH CURRENT POWER INDUCTOR

PG104

Susing flat wire, and SMD type.

Low radiation noise by magnetically shielded construction

High current, Low resistance.

Operating temperature : -40℃~+125℃.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Contact Us

Specification

Reading

Application

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number

料号

Inductance

电感量

μH

DCR

最大直流电阻

Isat

直流饱和电流

A

Irms

温升电流

A

SRF

自谐频率

MHz

Length

mm

Width

mm

Height

mm

PG104-151ML0.150.64245625710.2±0.510.5±0.54.0±0.3
PG104-331ML0.331.2218 4217010.2±0.510.5±0.54.0±0.3
PG104-561ML0.561.78173610010.2±0.510.5±0.54.0±0.3
PG104-102ML13.6516238010.2±0.510.5±0.54.0±0.3
PG104-152ML1.55.8313186310.2±0.510.5±0.54.0±0.3
PG104-222ML2.210.112155310.2±0.510.5±0.54.0±0.3
PG104-282ML2.811.79.2124610.2±0.510.5±0.54.0±0.3
PG104-432ML4.315.59113310.2±0.510.5±0.54.0±0.3
PG104-562ML5.622.6678.33010.2±0.510.5±0.54.0±0.3
PG104-682ML6.824.56.282510.2±0.510.5±0.54.0±0.3
Standard products are stocked手指斜点.pngBuy in stock in small quantities

Remark:

① Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 100kHz

② DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C

③ SRF measured using an Agilent 4395Anetwork analyzer and an Agilent 16193A test fixture.

④ DC current at 25°C that causes the specified Inductance drop from its value without current.

⑤ Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and 

does not represent absolute maximum ratings.

⑥ Electrical specifications at 25°C


remark

Dimension

规格尺寸-PG104
Electrical Characteristic Curve
曲线图-PG104


For reference only and does not represent the absolute maximum rating.