CN

HIGH CURRENT POWER INDUCTOR

PD3540

Flat wire windings provide extremely low DC and AC resistance.

Low radiation noise by magnetically shielded construction

Low loss ferrite cores provide flat L vs I

Operating temperature : -40℃~+125℃.

Through-hole (TH) mounting for rugged board attachment

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Contact Us

Specification

Reading

Application

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number

料号

Inductance

电感量

μH±10%

DCR

最大直流电阻

Isat

直流饱和电流

A

Irms

温升电流

A

SRF

自谐频率

MHz

长度

mm

宽度

mm

高度

mm

PD3540-682KE6.81.269611636.041.035.0
PD3540-103KE101.252611436.041.035.0
PD3540-153KE152.1644571236.041.035.0
PD3540-223KE223.23644936.041.035.0
PD3540-333KE336.383434736.041.035.0
PD3540-473KE476.382634636.041.035.0
Standard products are stocked手指斜点.pngBuy in stock in small quantities

Remark

① Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 100kHz

② DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C

③ SRF measured using an Agilent 4395A network analyzer and an Agilent 16193A test fixture.

④ DC current at 25°C that causes the specified Inductance drop from its value without current.

⑤ Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and 

does not represent absolute maximum ratings.

⑥ Electrical specifications at 25°C


remark

Dimensions

Electrical Characteristic Curve

规格尺寸-PD3540曲线图-PD3540


For reference only and does not represent the absolute maximum rating.