Low DCR to minimize losses and reducetemperature rise
Low radiation noise by magnetically shielded construction
Operating temperature : -40℃~+125℃.
Tray packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
Standard terminal is stripped and tinned for through-hole mounting but other terminal configurations such as bare copper, and press fit pin are available upon request Hot dipped Sn plating provides low risk of whisker growth
Reading
High efficiency DC/DC converters.
Single and polyphase buck converters.
Filter for audio applications.
Optimized for high current boost applications.
Part number 料号 | Inductance 电感量 uH±10% | DCR 最大直流电阻 mΩ | SRF 自谐频率 MHz | Isat 饱和电流 A | Irms 温升电流 A | Length mm | Width mm | Height mm |
| PH32A-102KE | 1 | 0.25 | 53 | 111 | 96 | 32.0±0.5 | 30.7±1.0 | 15.4±0.5 |
| PH32A-152KE | 1.5 | 0.35 | 37 | 104 | 96 | 32.0±0.5 | 30.7±1.0 | 18.0±0.5 |
| PH32A-222KE | 2.2 | 0.6 | 28 | 91 | 81 | 32.0±0.5 | 30.7±1.0 | 18.0±0.5 |
| PH32A-332KE | 3.3 | 0.95 | 22 | 71 | 70 | 32.0±0.5 | 30.7±1.0 | 18.0±0.5 |
| PH32A-602KE | 6 | 1.3 | 18 | 51 | 50 | 32.0±0.5 | 30.7±1.0 | 18.0±0.5 |
| PH32A-103KE | 10 | 1.9 | 12 | 42.8 | 42 | 32.0±0.5 | 30.7±1.0 | 18.0±0.5 |
| Standard products are stocked： |  Buy in stock in small quantities | |||||||
| Remark： ①Inductance is measured with a LCR meter Agilent 4284A or equivalent.Test frequency at 500kHz ②DC resistance is measured with keithley 580 Milliohm Meter , or equivalent. Reference ambient temperature 25°C ③SRF measured using an Agilent 4395A network analyzer and an Agilent 16193A test fixture. ④DC current at 25°C that causes the specified Inductance drop from its value without current. ⑤Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. ⑥Electrical specifications at 25°C | ||||||||
Dimensions | |
 | |
| Electrical Characteristic Curve | |
 |
Phone: 13823510378
Email：tianborong@powerhen.com
Address：3rd Floor, Building A2, Shenliang Automotive Electronics Characteristic Industrial Park, Guanlan Shenliang, Longhua New District, Shenzhen
CN
CN