PH20-222KL_SMD High Current Power Inductor_Products_ShenZhen Powerhen Electronic Co.,Ltd

Susing flat wire, and SMD type.

Low radiation noise by magnetically shielded construction

High current, Low resistance.

Operating temperature : -40℃~+125℃.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260℃, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30℃/85% relative humidity)

High efficiency DC/DC converters.

Single and polyphase buck converters.

Filter for audio applications.

Optimized for high current boost applications.

Part number 料号	Inductance 电感量 μH±10%	DCR 最大直流电阻 mΩ	Isat 直流饱和电流 A	Irms 温升电流 A	SRF 自谐频率 MHz	Length mm	Width mm	Height mm
PH20-701KL	0.7	0.92	70	32	65	21.8	21.5	14.5
PH20-142KL	1.4	1.27	57	31.5	52	21.8	21.5	14.5
PH20-222KL	2.2	1.65	49	28	32	21.8	21.5	14.5
PH20-312KL	3.1	2.3	42	26	29	21.8	21.5	14.5
PH20-422KL	4.2	3.35	34	24	24	21.8	21.5	14.5
PH20-552KL	5.5	4.4	28	22	21	21.8	21.5	14.5
PH20-702KL	7	6.18	26	21	18	21.8	21.5	14.5
PH20-862KL	8.6	7.91	22	17	14	21.8	21.5	14.5
PH20-103KL	10	8.76	21	16	13	21.8	21.5	14.5
PH20-153KL	15	9.57	19	14	12.8	21.8	21.5	14.5
PH20-223KL	22	11.72	13	12.5	12.5	21.8	21.5	14.5
PH20-333KL	33	12.55	9	12	12	21.8	21.5	14.5
PH20-473KL	47	13.42	6.8	12	10	21.8	21.5	14.5
Standard products are stocked：		Buy in stock in small quantities
Remark： ① Inductance is measured with a LCR meter Agilent 4284A or equivalent. Test frequency at 100kHz ② DC resistance is measured with keithley 580 Milliohm Meter,or equivalent. Reference ambient temperature 25℃ ③ SRF measured using an Agilent 4395A network analyzer and an Agilent 16193A test fixture. ④ DC current at 25℃ that causes the specified Inductance drop from its value without current. ⑤ Current that causes the specified temperature rise from 25℃ ambient. This information is for reference only and does not represent absolute maximum ratings. ⑥ Electrical specifications at 25℃

Dimensions	Electrical Characteristic Curve